Long Nose Pliers

Long-nose pliers are an essential hand tool for both commercial and consumer use. These pliers are usually used by jewellery designers, artisans, electricians, other merchants, and network engineers to snip, bend or re-position wires. The long shapes allow the plier to reach small areas where the wires or cables could be bunched up and where your fingers won't reach. They also ensure reasonable control during the cutting edge. Wiring pliers are designed to strip, cut, and manipulate wire while terminating it. Beta Tools offer an all-inclusive range of pliers and nose pliers.

Uses Of Long Nose Pliers

Common uses include gripping, bending, and cutting small-gauge wire. The long, thin jaws allow for precise control when working with wire, especially in tight space work that includes smaller gauge work would require needle nose pliers or long rose pliers.

Gripping:

The primary use for pliers is gripping. After a firm hold over the object, the users can tighten or loosen bolts by gripping them, handle the object with excellent precision, and remove fasteners, like nails and pins.

Bending:

The pliers can give mechanical leverage that enables the user to deliver more torque, allowing it to shape, bend or straighten metal. Professionals use them to manipulate cables and metal sheeting by twisting.

Cutting:

Some come with sharp blades along with the jaws. Hence, it can be used to clip, cut, and sever wires.

Buy Needle Nose Pliers From Beta Tools

From Beta Tools, you can get long-nose pliers, combination pliers, and other types of pliers in a one-stop shop. We are a wholesome tool store that provides every tool you need for professional or personal purposes. Shop from us for your next home or office project.

Frequently Asked Questions

How much weight can a heavy duty jack stand hold?

Capacity varies by model and is stated on each product page. Check the rating for the specific stand you are using, and always work in a matched pair.

Do I need 3 tonne or 6 tonne jack stands?

Work from the weight that will sit on the pair of stands rather than the vehicle’s total weight, then allow a margin above that figure.

Should jack stands always be used in pairs?

Yes. A matched pair set to the same height spreads the load evenly and keeps the vehicle level while you work.

Can a vehicle be left on jack stands overnight?

Stands are made to hold a static load, so a longer job is fine on level, solid ground. Check the vehicle is still sitting square each time you return to it.

What working height do I need for a truck or 4WD?

Measure from the ground to your support point with the wheels off. The tallest 3010H and 3010V models reach 1077 mm and 1090 mm respectively.

Browse the full range of Beta Tools jack stands, or talk to the UNIPAC team about matching stands to the vehicles you work on.